KT系列高端无铅热风回流焊机 KT Series High-End Lead-Free Hot Air Reflow Oven

產品描述
Product Description

• 高產能, 生産鏈速可達160cm/min；低能耗，全新熱工學管理系統，有效降低成本；專業應對高速生產及高精密度PCB封装工藝；
• 控溫能力強，高控溫精度，設定與實際溫差1.0°C以內；空載至滿載溫度波動1.5°C以內；超強快速升降溫能力，相鄰溫區溫差100°C以內；
• 最新隔熱技術加全新爐膽設計，保證室溫+5°C的爐表溫度；
• 全程氮氣定量可控，各區獨立閉環控制，可使氧氣濃度範圍控制在50-200ppm；
• 最新冷卻技術，多區雙面冷卻，最大有效冷卻長度達1400mm，保證產品快速降溫至最低的出口溫度；
• 新型二段式助焊劑回收系統，多點收集，充分提高回收效率，為客戶減少保養時間和頻率；
• 雙軌變速，單機成本，雙倍產能，節能達65%。
• High capacity, normal working conveyor speed reached 160cm/min. Low energy consumption, low cost. Special for the high-speed production and high density PCBA technology;
• Powerful temperature control, setting and actual temperature difference within 1.0°C, unload and load temperature fluctuates within 1.5°C; Rapid temperature raising ability. temperature difference between neighboring zone 100°C;
• The newest insulation technique and new chamber design ensured that surface temperature is room temperature+5°C;
• N²volume controllable in whole process, O density closed-loop controlled independently at 50-200ppm in every zone;
• The newest cooling technology, optional double side multi-cooling zone, the effective cooling length is 1400mm, make sure fast cooling of the product to the lowest output temperature;
• New two level flux separation system with multi-point collection which make separation thoroughly, so that the maintaince time and frequency was reduced significantly;
• Dual line in different speed, one set cost, double capacity, energy saving 65%,

View Brochure Here