SE系列無鉛雙波峰焊錫機 SE Series Lead-Free Dual Wave Soldering System

產品描述
Product Description

• 運輸系統採用無級電子調整，閉環控制，速度穩定準確；
• 入口端設有壓力輔助裝置，使PCB進入時避免打滑；
• 助劑噴頭采用步進電機驅動，保證助焊劑塗覆均勻；
• 噴霧系統模塊化設計，噴頭始終垂直軌道，保證助焊劑良好的穿透PCB;
• 強制自然風冷系統，可滿足無鉛工藝對冷却斜率的要求；
• 軌道角度手動調整，操作方便；
• 預熱區采用熱風加熱，溫度穩定。
• Closed loop with inverter control system to keep the stability and accuracy of the conveyor speed;
• The assistant pressure device nearby the entrance to prevent the PCB from slipping,
• Spray nozzle driving by stepping motor is to make sure the coating uniformly,
• Module design of spray fluxer system and the design of nozzle always be perpendicular to rail, which can make sure the flux penetrates PCB easily;
• Forced air cooling system to attain the cold-down slope as per lead-free required,
• Conveyor angle can easily be adjusted by manual,
• Standard with hot air heating for preheating zones
• 外形流線型設計，內部模塊化設計，適合SMT及直播元件的無鉛焊接；
• 噴霧系統採用離心風機上抽風，防止助焊劑滴到PCB上；
• 助焊劑緩衝罐感應器外置，更加可靠耐用；
• 內置助焊劑噴頭自動清洗功能系統；
• 標記冷風刀，防止助焊劑霧氣向外擴散，減少污染；
• 雙波控制採用無級變頻技術，可獨立控制波峰高度；
• 1/4HP 大功率波峰馬達，最大波峰高度可達15mm；
• 具有超溫聲光報警及緊急制動系統，所有馬達均有過載保證。
• Module design suitable for SMT & THT component soldering
• Exhaust adopt centrifuagal fan with double filters to avoid any flux drop to PCB;
• The level of flux container is controlled by non-contact sensors to ensure no Corrision and longer life;
• Flux spray nozzle with self-cleaning system;
• Standard with air knives to prevent flux expand to preheat zone;
• Wave height control adopted with inverter,it can be set individually;
• 1/4HP high power mechanical pump to meet the wave as high as 15mm;
• Light & Sound alarm, Emergency stop and over-load protection

View Brochure Here